Vicwest True Nature metal shingles in Edmonton – Iron Shield Roofing. Natural beauty, steel strength

Vicwest Metal Shingles in Edmonton

Iron Shield Roofing installs Vicwest True Nature steel shingles: Cedar Creek Shake, North Ridge Slate and Coastal Wave. Canadian-made, Class 4 impact and Class A fire rated, with a transferable lifetime warranty.

Vicwest True Nature

Canadian-made steel shingles with the look of shake, slate or tile

Vicwest True Nature shingles are formed from Galvalume-coated steel in Stratford, Ontario. They weigh about 90 lb per square, carry a Class 4 impact rating and a Class A fire rating, and come with a transferable lifetime warranty. Iron Shield Roofing installs True Nature on homes across Edmonton and area.

Why True Nature

  • UL 2218 Class 4 impact rating and ASTM E108 Class A fire rating on all three profiles.
  • Lightweight: about 90 lb per square.
  • Trims and flashings are formed from the same steel coil, and ridge caps carry the same imprint, so colours match.
  • Approved by CCMC (14173-R) for the National Building Code of Canada.
True Nature product lines

Three profiles, one steel system

Colour chips and photos below come from Vicwest. Tap any colour to see it larger, or open a product for full specs and project photos.

Vicwest True Nature Cedar Creek Shake steel roof on a two-storey brick home
Shake look

True Nature Cedar Creek Shake

The look of cedar shake without the warping, splitting, mould and rot. Quadra-Loc locks each shingle on all four sides.

Hidden fasteners160 mph tested12" × 50"
Colours (6)

Explore Cedar Creek Shake →

Vicwest True Nature North Ridge Slate steel roof on a stone home
Slate look

True Nature North Ridge Slate

A profile and shadow line that is almost indistinguishable from real slate, with the same Quadra-Loc interlock.

Hidden fasteners160 mph tested12" × 50"
Colours (6)

Explore North Ridge Slate →

Vicwest True Nature Coastal Wave steel roof on a two-storey white home
Barrel tile look

True Nature Coastal Wave

The shadow line of a terracotta barrel tile, far lighter than clay or concrete, installed direct to deck with no strapping.

Direct to deck1" profile14.5" × 51"
Colours (6)

Also available in Espresso (Signature Matte).

Explore Coastal Wave →

Compare

True Nature at a glance

From Vicwest’s published product information. All three are 28 ga Galvalume steel, Class 4 impact and Class A fire rated, and made in Stratford, Ontario.

Cedar Creek ShakeNorth Ridge SlateCoastal Wave
LookCedar shakeSlateBarrel tile
Coverage per shingle12" × 50" (4.17 sq ft)12" × 50" (4.17 sq ft)14.5" × 51" (5.13 sq ft)
Shingles per square242420
Profile depth0.5"0.55"1"
FasteningHidden, Quadra-LocHidden, Quadra-LocConcealed screws, direct to deck
WeightAbout 90 lb / squareAbout 90 lb / squareAbout 90 lb / square
Colours666
WarrantyTransferable lifetime warranty, subject to conditions: 50 years against perforation from corrosion, 40 years against chipping, cracking or peeling, 30 years on chalking
FinishesSignature Matte and Signature (solid colour) and Expressence (printed)
Code approvalsCCMC 14173-R, Florida FL40929, Texas Department of Insurance, Intertek CCRR-0416
Project photos

True Nature roofs on real homes

Prefer a stone-coated finish?

DECRA stone-coated steel

For a textured stone-granule finish over steel, see our DECRA stone-coated steel shingles, shakes and tiles.

Iron Shield process

How we install True Nature

Step 01

Inspect the roof

We check slope, decking, valleys, penetrations, ventilation and flashing before we quote.

Step 02

Pick profile and colour

We compare profiles and colours against your siding, stone and trim and recommend viewing a physical sample before you decide.

Step 03

Install the system

Shingles, matching trims, flashings and ridge caps are installed to Vicwest’s installation guide.

Step 04

Review the warranty

We walk you through the finished roof and the Vicwest warranty, which can be transferred once to the next owner.

Roof